| Listed | LPCB / CE-CPR |
| Certified | EN54-2:1997 +A1:2006, EN54-4:1997 + A1:2002 + A2:2006 |
| Power RatingInput | |
| Voltage | 240VAC +10%-15%, 50/60Hz |
| Input Current Consumption | 1:00 AM |
| PSU Output to CIE | 24.5 to 28.5 VDC |
| Batteries | 2 x 12V / 28AH |
| Networking and Interfaces | |
| Panel to panel communication | Can Bus [loop] |
| Number of Panels | 512 |
| Interface Port | USB, RS485 Serial, RS232 Serial, Ethernet |
| System Capacity | |
| Memory [Non-Volatile] | 1000 Fire Events, 10,000 General Event |
| Zones | 3,000 programmable |
| Total Group | 3,000 programmable |
| Sounder Group | 1,000 programmable |
| Common Group | 2,000 programmable |
| Loop Specifications | |
| Protocol/Addressing | T&A, Value range from 1 to 254 |
| No. of Loop | 4 Loop |
| Protection | Built-in 4kV Surge protection |
| Power rating | 16 to 24Vdc |
| Cabling | 1.2Km Max Length/2 x 1.5mm²solid core Fire resistance |
| Input/outputs | |
| Programmable Relays | 4 circuits, Normally Open/Close |
| Programmable Input | 1 Circuit, Power limited 24Vdc (for future use) |
| Programmable Auxiliary Power | 19 t0 28 VDC (Note: Current Limited) |
| Fixed Outputs (FPE/Sounder) | 2 Circuits, 18 t0 28 VDC (Note: Current Limited) |
| Indicator | 24 LED Status/ 160 Zone Indicators |
| Display | 7” TFT Touch Screen |
| Keypad | 5 Brigade buttons and Programming Keypad |
| Material / Color | Flat sheet Metal / with outer glass door, Orange stripe |
| Dimension Lx W x H | 530 mm x 490 mm x 135 mm |
| Weight | 16.70 Kg |
| Humidity | 0 to 95% Relative Humidity, Non condensing |
Tủ trung tâm báo cháy 4 Loop
Tủ trung tâm báo cháy 4 Loop
Intelligent Fire Alarm Control Panel TX7004
The TX7004 intelligent addressable fire alarm control panel comprise of a range of analogue addressable, microprocessor based fire alarm control equipment to offer flexibility in both design and operation. The System is modular concept for easy tailoring of system design, to meet the full requirements of the project. The TX7004 intelligent addressable fire alarm control panel is designed and manufactured to meet the requirement of BS EN54 Part 2 & 4.
The TX7004 intelligent addressable fire alarm control panel is designed to provide early warning fire detection, to quickly identify the location of fire and provide user definable text informing the occupants of the building of potential smoke spread. Simultaneously, the TX7004 will alert and evacuate the occupants, and control all necessary auxiliary command functions such as
elevator control, air handling shut down, gas shut off & damper control, as per the cause and effects requirements configured though Command Builder Set-up.
